Is it possible to synchronize the MX colortable with the Microstation/Powerdraft/AutoCAD colortable? If I change the colortable in my DGN to a AutoCAD colortable, it doesn't change the colortable from which you can select colors (CL0001). Also the colornumbers used in an inputfile are being changed to other colornumbers in PowerDraft. This is very anoying when making an isopachyte colorplan.
With regards,
Gunther Groenestein
I suspect the main problem has been understanding the issue. I also had a long running saga over the use of black and white. But I suspect the MX colours are heavily embedded so I would imagine that it is not an easy fix.
Mike
Gunther
Agreed - what we see at present is not a logical long term solution. I'm sure I have already requested the same CR some years ago.
In my opinion a color number in my Inputfile must be the same as the color number in PowerDraft/MicroStation/AutoCAD. Do I do not have to adjust any color table. Not everyone has the capability/knowledge to adjust files in the program files directory. If I adjust my colortable in PowerDraft. My drawing should change according to the new color table and not being translated through a translationtable.