I'm trying to load different dbx's, but all I get is this ("no jobs found"):
Is it some secret clue to get Microstation to read my files? I have no problem getting data from theese dbx's into my other survey systems (Novapoint, Gemini, Geo, Civil3D,...).
Hi Morton,
you need to click the "Select" button and navigate to the folder that contains your Leica data.
Once at the folder, the application is looking for the file with the extension of XCF. There are many other files that the tools uses, but the XCF is the project file that is the start point.
Select the XCF file, and the job number will appear in nthe "Leica Jobs Found" drop down list.
You will have the option of importing Points or Measurements or Both.
Once you set the option, click Accept.
Hello Michael!
Now I have tried the import with a Leica representative by my side and we cannot get it to work. We are wondering if there are some problems with the PrintFPC application that you are using. When we select the job and press Open we get No jobs found in the bottom of the dialog. Are there some settings that we have to do inside Microstation?
Hi Morten,
There are preference type settings inside MicroStation (Settings>Design File>Data Aquisition) though there isnt anything specific to set for the different data collector types.
Any chance you can send me the data files so we can take a look?
All of the files that are in the data folder please...
Thanks,
Please find attached files (also sent by email).
Morten G