In Power Civil (Geopak) I need to know the slope or grade along arc elements. The Height/Slope analysis tool is not able to do this, nor do I know of any other tool that can, aside from the Element profile tool which is too cumbersome for doing slope inquiries. Are there any other means to inquire slopes on arcs?
Power Civil v8i 08.11.05.37
One way is to use the Analysis>Profile tool... After you select the element, the Preferences Tab will return the element length, as well as the min and max elevations on the element; a simple calculator operation will then return the slope. HTH
That is an innovative way to use that tool Dan. Thanks.
Neil Wilson (aka Neilw)
Power Civil v8i 08.11.07.245
AutoCAD Civil 3D 2018