IR SS1 (246)
for about a week i get this message each time i save corridor and tmls (i didnt have this problem on the same project before but i did mess a bit with variable manager). i created both tml, corridors stles from skratch. i got metric option selected in project defaults, i tried to save tml/ird with options convert imperial to metric. still nothing. why i get this message? how to set it back to metric?
didn't get the message and also it didn't work for me
I had the same problem as well. If anyone is still experiencing this issue, here is the fix that worked for me. Note It was nothing to do with the .itl file.
1. Close down MStn & InRoads
2. Open .ird file in notepad
3. Change Linear Units="1" to "2" and save it.
4. Open back up project.
I'm not really sure why exactly this works, but I don't get the message anymore and everything seems to work/function as normal. Screen shot below.
I have recently been getting the same problem.
I have tried the below conversion through saving, however when I convert back to metric I get the meesage "Imperial units used while creating this library".
I too have checked both the template and IRD files and they both show metric units.
Any other suggestions on this?
ah ok. thanks ill try that
after first step, of course lenghts are changed, but after second step they should change to original lenghts You have. In my case it helps and message stopped appear. I did the same with IRD file.