Have one feature code that is not being recognized.
It does not visualize and when looking at the points with that code in the survey editor the Geometry column is blank, i.e. no P for Point.
The feature code is: 10 and there are other codes such as 1011, 1047 etc.
In the smd it is set to a point, not linear, with the standard cross symbol and font. The level is on to display the point symbol and labels.
Geopak PowerCivil 245 and the previous 22?
Befuddled.....
Hi,
I reset that option from Cell to Symbol.
I did not set a symbol - I basically wanted it to draw the + only.
I then visualized that data.
All the "10" coded points (ground shots) now have a + symbol and the Pt#, Elevation & Dexcription are written to each point (see attached image).
Can you try it without enabling the symbol and see if you get bthe same results as I do.
This will give us a baseline to work from.
Have tried that and could not get the default "A" to not visualize.
Unchecked the "Point Feature" box in upper right corner and .........
they display as expected.
Thanks for your help!!!
thats the upper left of the smd manager!