Have one feature code that is not being recognized.
It does not visualize and when looking at the points with that code in the survey editor the Geometry column is blank, i.e. no P for Point.
The feature code is: 10 and there are other codes such as 1011, 1047 etc.
In the smd it is set to a point, not linear, with the standard cross symbol and font. The level is on to display the point symbol and labels.
Geopak PowerCivil 245 and the previous 22?
Befuddled.....
Thanks for the quick response!!
Had already tried that and just tried it again, when changed to symbol the "Point Feature" turns on with a default of "A". Cannot seem to turn this off. On other feature codes can use the "Point Locater" symbol cross without the point feature turning on even though cell is on, not symbol. Under culvert in the smd look at 1104, for example. This works as expected with the cell on but not defined.
This may be the problem.
The SMD feature code "10" has been set as a type "cell" - but no cell is assigned.
Reset that feature code to symbol and try again.
Attached....
Please post the data.
DGN
GPK
SMD
ASCII data.
Put data into a ZIP file and attach to this thread and I'll take a look.
Thanks,
Yes, there is an SMD feature code "10" defined. The points are ascii xyz coordinates imported into the database.