Hi,
While doing long section drawings (no matter what method I use) I get wrong annotation on small vertical radius. Instead R=100 L=50 I get R= L= without values.
Any ideas?
Best regards
Lukasz
L,
It's a font size thing! My workaround was to have my geometry drawn twice - once at my required height, say 0.25, and once very small, say 0.01. If you zoom in on the small text you'll see that it displays the values. Then in AutoCAD I amend the 25 text and delete all the 01 text.
S
I make it same way :)
Best regardsAleksander Zamorski