ALL - How do I "drop" a roundabout to lose its dynamic capabilities so that I may edit individual components as I see fit? I need to provide some radii that are a bit unconventional, so I would like to have manual control. The approaches are pretty well set, so I'm not concerned about losing the dynamic aspect.
THANKS!
Use the Microstation Drop command
Robert GarrettSenior Product EngineerBentley Systems Inc.
I had tried that and did not perform as expected.
Eddie Giese, PEProduction Manager | Senior Roadway EngineerLicensed in FL & PAACEC FDOTConnect Instructor on behalf of FDOT
Patel, Greene & Associates, LLC PowerGEOPAK V8i SS10 (08.11.09.918)OpenRoads Designer 2021 R2 (10.10.21.4)OpenRoads Designer 2020 R3 (10.9.0.91)ProjectWise Explorer CE 10.0.3.453LumenRT CE Update 14 (16.14.60.98)
What did you get - You should have gotten a bunch of individual geometry elements with their individuals rules intact. Then if you wanted to devolve all the way to plain graphics drop again.
Also, it might be necessary in the Drop dialog to toggle on Application Elements.
I'm running into a problem with the Drop command. On the roundabout elements, when I "Drop" them, I receive the message "Nothing to Drop". I'm also unable to "Copy" these elements.