[mx road] problem with divided carriagway

I  am trying to make cross section for median i am getting problem with  left side vertical offset , vertical offset is applying for CEL0, for right no problem.

please  respond it as soon as possible.

                      ******RIGHT Meadian ************

110,MCL0,3=LCL0,4=0.15,5=8600,7=0,8=23700
101,MCL0,2=LCL0,3=LCK2,4=0,5=8600,7=-4,8=11150,10=-4
101,MCL0,2=LCL0,3=LCK2,4=0,5=11150,7=-4,8=11370,10=-6
101,MCL0,2=LCL0,3=LCK2,4=0,5=11370,7=-6,8=13200,10=-6
101,MCL0,2=LCL0,3=LCK2,4=0,5=13200,7=-6,8=13400,10=-8
101,MCL0,2=LCL0,3=LCK2,4=0,5=13400,7=-8,8=23700,10=-8
110,MCL0,2=LCK2,3=CEL0,4=-0.15,5=8600,7=0,8=23700

                           ******RIGHT Meadian ************

110,MCR0,3=LCR0,4=0.15,5=8600,7=0,8=23700
101,MCR0,2=LCR0,3=LCK1,4=0,5=8600,7=4,8=11150,10=4

101,MCR0,2=LCR0,3=LCK1,4=0,5=11150,7=4,8=11370,10=6

101,MCR0,2=LCR0,3=LCK1,4=0,5=11370,7=6,8=13200,10=6
101,MCR0,2=LCR0,3=LCK1,4=0,5=13200,7=6,8=13400,10=8
101,MCR0,2=LCR0,3=LCK1,4=0,5=13400,7=8,8=23700,10=8
110,MCR0,2=LCK1,3=CER0,4=-0.15,5=8600,7=0,8=23700