Hello,
Could anyone tell me how to annotate end areas of cut and fill on cross sections drawing via linemode? I got a volume/area strings but don't know how to extract information from them while creating CS and how to put them onto final drawing.
RegardsAleksander Zamorski
Aleks,
Try one of these. I believe that I got them from the old MX site back in 2007.
regards
Pete
Thanks Alex, I'll check it out :)
P.S.Yes, that's it :)
Dear All ,
Please find the enclosed input file
I have a design model, triangulation model, and pavement design is carried out using Pavement and subgrade design (to Existing pavement),
when i run the volumes and sections for volumes and areas , they are running properly. But when displaying it in cross section it is showing some non sense values in the DCS drawings.
I think the string dimension that i had used to annotate the cut and fill; area and volumes are incorrect, someone please correct.
Secondly I need the fill to be calculated from existing to earthworks outline and cutting to be calculated from existing to design and the same should reflect in the volume and area string and also in X section drawings and also in hatching style. please let me know how that can be done and which section set shall be used to do that.
Early reply is deeply appreciated.
Regards,
Jayanth