https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/83826/mx-ignoring-points-with-in-close-vicinity-during-triangulationHi, I have created curb line with an horizontal offset of only 0.0001m offset and vertical offset of 0.15m, however when I am my triangulating design model it is ignoring kerb line which is exactly 0.15m high and 0.0001m offset. Warning I am gettingen-USTelligent Community 12https://communities.bentley.com/thread/234837?ContentTypeID=1Mon, 18 Feb 2013 13:28:56 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:d77b15ce-e62b-47a7-af00-edbda4de8e81Mark Marnell<p>You need to design your kerb line further away horizontally - 0.0001m is too close, as that is within the point search tolerance. (Remember that triangiulations cannot have vertical faces.)</p> <p>Offset the top of the kerb by 0.002m - that should solve your problem.</p><div style="clear:both;"></div>