Please forgive my lack of knowledge of InRoads, but we only have to deal with it here and there. We received a survey that was done with InRoads, and one of the files we received is the Topo file, which is a 3D DGN with the points and line strings displayed. I would like to be able to convert this to a 2D file to use in our plans. When I try to do the simple "Export>2d...", I lose almost all the elements that originally had an elevation (something other than 0). I have also tried to copy the elements into a 2D file from the referenced 3D file, but they again disappear.
If needed, I may be able to just get by using the 3D file, but it doesn't let me fully edit the elements in the 3D file. I can change the symbology, but I can't rotate elements or anything like that.
Is there something that I am missing that could give me functionality that I need?
Thanks for the help.
Ken
Well, I just opened the file used <File <Export <2d and all elements exported to the 2d file. What version of Microstation are you using?
Something you can try if you are still having an issue is to copy the file, set everything to elevation 0 and then export that file to 2d. It's not a solution but at least a workaround until you figure out what is causing your problem. I would contact the Support Group.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453