Not a good day for me and Roadway Designer...
I created a model from Corridor Modeler and created a DTM from it. When I use the "Draw Cross Sections from Surface" tool, for some reason it doesn't draw a certain line. This line happens to be the back slope after a paved side ditch. The odd thing is that point label is drawn where that line would connect to the existing ground, but it just isn't drawing the line. The back slope line is drawn on the section before and after without any issues and the station is a nice even station.
Any ideas what is happening with this? I have had a similar issue on a much longer job several months ago, but I just worked around it due to time constraints. That was with an older version of Windows, MS, and GPK.
My current versions are as follows: MS - v8.11.09.397, Geopak - v8.11.07.536, Windows 7 SP1
Thanks.
This is a known issue we have addressed that occurs in certain situations. Please contact Kevin McDonald at Bentley and he will assist you. kevin.mcdonald@bentley.com
I have contacted him. Thanks Chuck.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki