I am trying to get my SS2 templates to work with SS3. I need help targeting XY styles with end conditions. I have referenced in these plan view graphics but I don't know how to get my corridor to recognize them. In SS2 (Geopak) there was a Plan Graphics - Import tool. Also where is the Roadway Designer Display References tool (Display plan view graphics as Right of Way lines in the cross section view). This was a great trouble shooting tool.
Add this targeted graphic as corridor references and then set target aliasing for this corridor. With target aliasing you can override any end condition target with items from corridor references list.
Best,
Adam
OpenRoads Designer 2022 (10.12) | OpenRail Designer 2022 (10.12)
Thanks for answering the first part of my question. Do you have a recommendation for displaying plan view graphics as right of way lines in the cross section view.
Well, since cross section view shows 3D graphic in dgn file then I would extrude ROW lines vertically into a Microstation surface or mesh. When done, you will see ROW in Cross-Section View.
Answer Verified By: Jon Collado
Thanks for the ROW curtain idea.