SS3 - problem with simple horizontal point control

Re: SS3 - problem with simple horizontal point control

Adam Wieczorek — Thu, 01 Aug 2013 11:03:46 GMT

Hi Juan,

Ask Bentley Technical Support, I was provided with a fixed software build.

Adam

Re: SS3 - problem with simple horizontal point control

Juan Solo — Thu, 01 Aug 2013 10:08:58 GMT

Hi Adam,

I'm having the same problem, any workarounds ?

regards,

Juan

Re: SS3 - problem with simple horizontal point control

Adam Wieczorek — Mon, 08 Jul 2013 12:48:48 GMT

Hi Paul,

I've already logged a ST regarding this problem. That was the first thing I did when couldn't to handle it on my own. I sent you my data file so you may try to reproduce that.

Thanks,

Adam

Re: SS3 - problem with simple horizontal point control

Paul Cusack — Mon, 08 Jul 2013 08:02:48 GMT

Hi Adam,

It's clear that there is some problem with the application of the point control in your dataset but I have not been able to reproduce it on my machine using my own data. I'd suggest that it would be worthwhile to contact technical support to provide your dataset and software versions being used so that they can further investigate and log trouble reports if necessary.

Regards

Paul

Re: SS3 - problem with simple horizontal point control

Adam Wieczorek — Sat, 06 Jul 2013 18:56:39 GMT

I recorded a movie to show my workflow. It happens with this geometry all the time. I tried to create new files. Tried to control not with geometry but with feature definition. With no success. When trying to figure out what might be a reason of this issue and testin a number of sample geometry configurations I noticed that sometimes half of backbone is not perpendicular to the CL when the edge of pavement is tied to control line. I performed tests on two independent PCs with different files, etc. Sometimes it works fine, but usually does not.

has anyone of you had similar problem with point controls? This issue has stopped my production. This is my second project with OpenRoads. The first went seamless (3D modelling) until evaluating the design with cross-sections. Ok Just watch my horror movie:

communities.bentley.com/.../0334.PC_5F00_problem.avi

UPDATE: The same geometry but created near to Global Orgin in DGN file works ok. What is going on?

BTW: here is a link to my forum post (SS3 preview community) when I first met this problem: http://communities.bentley.com/administrators/closed_betas_communities/bentley_civil_v8i_selectseries_3_technology_preview/f/343139/t/77785.aspx

Re: SS3 - problem with simple horizontal point control

Krzysztof Burdziel — Thu, 04 Jul 2013 23:22:10 GMT

Please take a look at the movie attached:

communities.bentley.com/.../6076.point-controls-problem.wmv