Can't delete Alignment

RE: Can't delete Alignment

Aaron Boehmler — Thu, 22 Aug 2019 13:13:54 GMT

Thank you Mike. This helped me greatly this morning.

Re: Can't delete Alignment

Christiaan Post — Wed, 10 Jul 2013 10:50:38 GMT

Thanks Mike,

Indead I use MicroStation complex element to create the alignment. This project is was for a visalisation and there was no money or time (1 day) to create it with civil rules.

Regards,

Christiaan

Re: Can't delete Alignment

Mike Barkasi — Tue, 09 Jul 2013 17:48:59 GMT

It appears the complex elements were created from a MicroStation complex element. To be clear our civil elements are basically MicroStation elements with rules (and gaps / intervals)

Im not positive what caused this. It could be the base geometry had an overlap, or it could be a relationship was broken at some point as I see a number of broken relationships in the file. Some of these may have been because I did not get the attached references.

To delete the problem alignment follow the video attached..

http://www.screencast.com/t/OacKBuZ5

The steps are

1. Open the 2D Model

2. Use the "Drop" command and drop the complex element

3. Delete the elements

HTH

Mike

Re: Can't delete Alignment

Christiaan Post — Tue, 09 Jul 2013 14:26:02 GMT

File is send.

Re: Can't delete Alignment

Mike Barkasi — Fri, 05 Jul 2013 17:43:02 GMT

Please send me the file

mike.barkasi@bentley.com

Thanks