Multiple corridors, aligning template drops Open Roads

I am using a mainlane corridor with separate frontage road corridors attached when creating my cross sections. I am using the mainlane alignment when running cross sections. Since the frontage roads aren't on the exact same stationing as the mainlanes, they are in-between template drops and are interpolating and not exactly touching existing ground.

Is there a way to add template drops or key stations that correspond with stationing from another alignment to prevent the interpolation? My main concern is for when I run earthwork calcs and the end conditions not connecting to existing ground exactly.

I hope this makes sense.

Parents
  • Hello Brisket,

    First I would like to verify what product and version you are running.  I am assuming you are running InRoads V08.11.09.493 with the Open Roads Technology.

    You should be able to create Key Stations by going to the Corridor Modeling > W > and selecting the key. 

    This command will ask you to select the Corridor you would like to add the key station to and then you can specify the station.

    If you are not seeing the results you want after adding in Key Stations, please let me know.  We can further troubleshoot with your dataset.

        

    Answer Verified By: brisket 

Reply
  • Hello Brisket,

    First I would like to verify what product and version you are running.  I am assuming you are running InRoads V08.11.09.493 with the Open Roads Technology.

    You should be able to create Key Stations by going to the Corridor Modeling > W > and selecting the key. 

    This command will ask you to select the Corridor you would like to add the key station to and then you can specify the station.

    If you are not seeing the results you want after adding in Key Stations, please let me know.  We can further troubleshoot with your dataset.

        

    Answer Verified By: brisket 

Children