Multiple Installs (MS, GPK, InRoads)

Question

For a variety of reasons, I am trying to get MicroStation, Geopak (both SS2 and SS3), and InRoads (SS2) installed on my machine. I had it all installed at one point, but I had a variety of issues that crept up. To try and get everything working correctly, I would like to try to uninstall everything and install it in the recommended fashion. So, after I use the Windows Program Uninstall tool to get rid of all the MS, GPK, and InRoads programs, what is the recommended method of installing all of these? 
 If it matters, GPK SS2 will be my main workhorse. I use InRoads just a little bit to convert some files that come from a client. I am trying to get into GPK SS3 just to get up to speed with the latest release. 
 
 Are there also prereqs that need to be installed? This will all be on a Windows 7 machine. 
 
 Thanks for any help that comes my way. 
 Ken

Nico Roman · Accepted Answer

Can I run GEOPAK SS2 and GEOPAK SS3 on the same machine? 
 Yes, with the following recommendations: 
 a.	Access the softwares using their respective icons. (with either the “-wsLoad_GEOPAK_SS2” or “-wsLoad_GEOPAK_SS3” switch set) 
 b.	Use separate MicroStation preferences ( username & projectname ) while using GEOPAK SS2 & GEOPAK SS3 
 Notes: During the install the default folder names where GEOPAK SS2 & SS3 install are different. Both SS2 and SS3 cfg files get loaded in the config\appl folder of ustation 08.11.09.397. The “-ws” on the icon (Start => All Programs => Bentley => Bentley Geopak Suite v8i (Select Series #) => Bentley GEOPAK Civil Engineering Suite designates which cfg to load. 
 you can load InRoads as well and use a separate shorcut to launch it.