How to edit alignment cogo points

Ensure that you have a read-write access to your alg file.

Adam checked on that and the alg does have read-write access.

Adam checked on that and the alg does have read-write access.

The only way I was ever able to "edit" an alignment COGO point was using the lot layout tools. And as I recall, the conditions had to be just right. I think the thoughts behind alignment COGO points was that these COGO points were located using COGO and once assigned to an alignment, used the coordinates of those points. But if you edit the alignment such that the alignment no longer lines up with the points, they are discarded as alignment points.

The alternative is to convert alignment points to COGO points, edit the COGO points and redefine the alignment using the points.

To edit cogo point alignment description, go to Geometry>Cogo Points>Edit/Review Extended Descriptions.

When the traditional "Edit Cogo Point" tool is used, the edited alignment point will be removed automatically.

InRoads V8i(SELECT series 2) V08.11.07.615