An issue came in today that I think will benefit the community to see troubleshooting techniques as we work toward a resolution.
We are seeing discrepancies in some cases between what the modeler will show as a point offset value (or elevation) and what the cross section will show for the same point. The settings we are using are to 4 decimal places, so the delta may be 14.5708 in the modeler and 14.5715 in the cross section. Is there any known issue similar to this?
Do you see this in GEOPAK 08.11.07.615 or a previous version? I see the differnce is quite small in your example, is there a working units issue between the plan dgn file and the cross section or are you placing them in the same file as the model?
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Beebe,
We are currently on .566 so have not tried on a newer SS2 version yet.
We have modeler open in the Xsec file, highlight the control point in the section view of modeler and see the same point in the Xsec above it annotated and offset by that different number. I'll get screenshot when the user is available
Hey,
Try to reduce the interval of the template drop.
Assaf.
Thx, we'll let you know.
There was an issue with Alignments with Station Equations that we addressed in a subsequent build of the SS2 software. So try it in the latest or possible we need to send you a priority build to try.