InRoads S&S HGL Display on Profile

Question

I am using: 
 MicroStation V8i (Selectseries 2) - Version 08.11.07.443 
 Bentley InRoads V8i (Select Series 2) - V08.11.07.615 
 I have chosen to display my HGL on my profile but nothing will show.

Kevin McDonald · Accepted Answer

OK... now that we have verified that the HGL has been calculated for these structures, we just need to confirm the following: 
 1.) These structures listed in this design log are the same structures being profiled 
 2.) The elevations of the HGLup/dn listed in the design log are elevations that are displayed in the profile range. 
 3.) The symbology defined for the HGL on the Network tab is drawing on a level that is turned ON in MicroStation. 
 If you have confirmed these 3 items and it still does not display, it might be helpful to post your SDB and XIN file for us to test.