In GEOPAK SS2 I could easily create a surface from a corridor and a tin file would be automatically generated. I could then extract a profile from this tin and draw it on a profile cell using the Draw Profile command. In SS3 how do I create a tin (or a terrain) from a corridor so that I can continue to show an extracted profile using SS2's Draw Profile command? An example of this is analyzing EP profiles for low points that might be caused by superelevation transitions for instance, and many other situations.
Josh
Hi Josh,
seems you and I are going in parallel with regard to our learning process... I was looking at this only today.
I used the "Terrain > create Corridor Alternate Surfaces" to create the terrain from the example I'm currently working on. That seems to work OK...
Might be an option.
I know its there for a different purpose, but sometime you just have think a little laterally.
Thanks Michael. I didn't know about that tool. I'll have to edit my templates to have an "alternate surface" that is the top, finished grade.