corridor clipping boundary, I would like to know how to create a civil cell with corridor clipping boundary. My civil cell does not prompt me for "select corridors to be clipped option".
Hi,
When you have completed the Civil cell, go to project explorer and look in the map Civil cells, dependent elements, right click terrain model and select "Ad as corridor clipping boundary" that's it.
Regards
CP
Answer Verified By: Culburra
I have created my 3D civil cell in OpenRoads and am trying to add a clipping boundary to my civil cell, but the terrain model I created does not appear under Dependent Elements. Do you know what I need to do to make the terrain model appear so I can add a clipping boundary?
Maybe you can share the DGN with the Civil Cell,sSo we can take a look?
Regards, Christiaan
Hello I have done exactly as you stated above, how ever when i place the civil cell in my corridor it doesn't clip out the corridor even though I have the a terrain that is in the corridor clipping boundary civil cell layout.
I also do not see this working. The Corridor Clipping Boundary is applied to the surface template, and is listed as the Corridor Clipping Boundary as shown in the OpenRoads model. But as you can see from the picture attached the End Condition Fill on the Corridor continues on through the plan view and the Section View. I though this was possible because the corridor was in a different file but tested with corridor and civil cell in same drawing and still did not work. I also reprocess the corridor to see if it was an update thing, but it was not.
Mike LongstreetVermont Agency of TransportationCivil Engineering Technical SupportVTCAD Help