corridor clipping boundary

RE: corridor clipping boundary

Mike Longstreet — Mon, 06 Jun 2022 18:25:15 GMT

I also do not see this working. The Corridor Clipping Boundary is applied to the surface template, and is listed as the Corridor Clipping Boundary as shown in the OpenRoads model. But as you can see from the picture attached the End Condition Fill on the Corridor continues on through the plan view and the Section View. I though this was possible because the corridor was in a different file but tested with corridor and civil cell in same drawing and still did not work. I also reprocess the corridor to see if it was an update thing, but it was not.

RE: corridor clipping boundary

Trevor Walk — Mon, 26 Oct 2020 19:14:01 GMT

Hello I have done exactly as you stated above, how ever when i place the civil cell in my corridor it doesn't clip out the corridor even though I have the a terrain that is in the corridor clipping boundary civil cell layout.

RE: corridor clipping boundary

Christiaan Post — Mon, 15 Sep 2014 06:49:58 GMT

Maybe you can share the DGN with the Civil Cell,sSo we can take a look?

Regards, Christiaan

RE: corridor clipping boundary

nrockey — Fri, 12 Sep 2014 20:12:24 GMT

I have created my 3D civil cell in OpenRoads and am trying to add a clipping boundary to my civil cell, but the terrain model I created does not appear under Dependent Elements. Do you know what I need to do to make the terrain model appear so I can add a clipping boundary?

RE: corridor clipping boundary

Christiaan Post — Wed, 18 Dec 2013 09:21:54 GMT

Hi,

When you have completed the Civil cell, go to project explorer and look in the map Civil cells, dependent elements, right click terrain model and select "Ad as corridor clipping boundary" that's it.

Regards