How to Automatically get offset/elevations on fixed points on a cross-section? How to export these offset/elevations to Excel?

Hi,

I'm sure there's a number of ways to achieve this and "how" you are creating your cross sections may dictate the answer.

GEOPAK SS2:

If you create your cross sections using criteria, you could have the criteria create a point and piece of text on each XS at the location you wish to export the Station/Offset value for and then find and extract that point to COGO by using the XS Reports.

There is a tool there that can search XSs for a piece of text and store that point into COGO.

And, using the Survey reporting tools, you can tabulate that list of points that are stored in COGO as a Point Number/Station/Offset/Elevation (the actual columns are configurable) and place that table into MicroStation and/or store it as a text file.

If you are not using criteria to create your XSs, please provide information regarding how you are creating them for an alternative answer.

HTHs

Michael

Hello

The XS that I created are drawn using the "existing ground cross-sections"'; from XS pattern lines that I drew on the "existing topo" file. These sections are created directly from the TIN model. There are no proposed cross-section elements.

Thank you.

Hello

The XS that I created are drawn using the "existing ground cross-sections"'; from XS pattern lines that I drew on the "existing topo" file. These sections are created directly from the TIN model. There are no proposed cross-section elements.

Thank you.

can you post a capture of what you have? i am not sure i understand. if you have existing ground only, which points do you want to report?

Above is a capture of 1 of the XS. Basically; I need elevations along all points marked by the white lines for Hec-Ras modeling.

ok. go to our cross section tools. there is a tool there called xs reports. we have hec ras reports that you can run