create station equation

Question

Hi 
 How can I create simple station equation for horisontal geometry. 
 I have PowerCivil ss3 
 
 Sigfus

Mike Barkasi · Accepted Answer

please send me your geometry files (alg or DGN) 
 mike.barkasi@bentley.com

Mike Barkasi · Answer

This is shown in M's video on the Mbuilds channel 
 www.youtube.com/watch

Mike Barkasi · Answer

A GPK is the GEOPAK equal to an ALG (InRoads) 
 The feature definition shown in the video was used to auto annotate and also auto store (or persist) the geometry to the native geometry (in this case a GPK) 
 You can use the example workspace provided with the software if you are not familiar with setting up a feature. Example geometry features are provided that will auto annotate and auto store geometry. 
 IMPORTANT: You do NOT need to auto annotate nor auto store geometry to set up stationing or station equation on an alignment. 
 To access the example workspace, set your Workspace to "Example" and set your Project to Bentley Civil Imperial or Metric. 
 you can also set the interface to Bentley civil. 
 HTH

create station equation

Michael Barkasi

`Michael Barkasi`