Inroads missing command 'Apply Template'

Question

Hi all 
 In Inroads V8i SS2 there is a function under: surface > design surface > Apply Template. 
 In Inroads V8i SS3 I miss that function! Where did it go? How to activate this command? 
 
 Jean Castro

Chris Key · Answer

All modeling and templates have been moved to the new OpenRoads technology. Since the templates no longer exist in the native InRoads commands, we could not have this command to apply a template to an element. 
 Instead, you have the ability to apply a template on an element through the Feature Definition. For example, I have a feature definition called Road_Centerline and when I look at the properties for the Feature Definition, go to Linear Default Settings and you can set the option for Corridor Template . Once you browse to the template you wish to apply it will save this setting. Any new linear element you place with this Feature Definition assigned will apply that corridor template to that element.

Jacquelyn Pettus · Answer

Here are several videos pertaining to Feature Definitions that you may find helpful: 
 communities.bentley.com/.../7038.basic-settings-openroads.aspx

Chris Key · Answer

See this forum post yesterday regarding the Project Explorer and how to change the settings: 
 communities.bentley.com/.../96239.aspx