My workspace contains tests for SS2 vs SS3 and assigns different variables based upon these settings. So if there is a place this is saved, I can probably add more assignments so that when I switch, it will restore the Ss3 settings. I understand its not remaining open - I want to try and make it restore if possible. So, please, where is it saved?
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration
For additional information, please refer to the following wiki:
communities.bentley.com/.../13077.unable-to-access-survey-civil-standards-or-civil-model-in-project-explorer.aspx
Where in a "workspace" is this stored?
Thanks Chris, I try this.
This question is answered in detail in the following forum post:
communities.bentley.com/.../280264.aspx
The short answer to your quesiton is to go in MicroStation to Settings > Project Explorer and set the options at the very top back to true. If you move between InRoads SS3 to SS2, this setting will change every time if using the same workspaces. It is recommended to have a separate workspace so the settings can remain saved.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Answer Verified By: Ikasten