Hello All,
Let me start with a description of the work..
Approx. 130 Miles of Proposed Track to run along existing Track.
Approx. 260 Grade Crossings.
Is there anyway to automatically import Track Vertical Elevation for each Cut of Roadway Grade Crossing Profile to confirm the tie in point to be accurate and consistent with track alignment when crossing the each of 260 grade crossing roads?
Initially, I had to import 1 station at a time from the intersecting Station that I gathered from using the Export Geometry Intersecting Tool.
FYI- We started learning inroads when this project started but are realizing it is a much powerful tool than Geopak. Anyways, any help to facilitate this would be greatly appreciated. As you can imagine seeing the amount of work and coordinating with track/road, this can be time consuming.
Thanks,
G
What command are you referring to within InRoads (exact location) and what version of InRoads are you working in?
Under the Tools > XML Reports > Intersecting Alignment Stations, you can run a report from your main proposed track and include all the grade crossing alignments by using an asterisk in the include field to include all alignments. When you Apply and the report browser opens it will include the intersecting points of all the included alignments against the proposed track. Then the information in that report could be used or manipulated to get a format you need for the elevations.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki