Intersecting Two Slopes in Two Different Corridors

Hello,

I have a divided highway in two different corridors (east bound/west bound). I have a median ditch in the center. I would like to somehow find the intersecting points of both slopes to create my ditch. I have created two separate models and used target aliasing in one corridor to show me the slope of the other corridor as shown in the pic below. Is there any way Geopak can find the intersectios of the two slopes?

Parents Reply
  • Thanks CADDCOP, I went through the material and it somewhat worked. In target aliasing I brought in both my corridor and proposed surface. It will not target the corridor but did target the surface. The only problem is, is when the proposed surface came in, the top of pavement looked correct but the slope was not a perfect 1:4 like in my template or in my corridor. So I don't know why it is not a perfect 1:4. I also tried Daniels suggestion with no success. Can someone from Bentley chime in? Thanks for the help everybody.

Children