I am using Point Controls for a sidewalk transition and have included Station Limits as shown below. The sidewalk of my template adjusts just as expected in this transition zone.
However, in areas where I have a driveway (where the ALG defined by the sidewalk elements is missing) the sidewalks do not draw as expected.
It seems that the Station Limits are being ignored. Is there something else I am missing?
Power GEOPAK (SS2) 08.11.07.615
Probably need to see your template library to start. But from looking at the picture I am guessing that you have a style constraint on the sidewalk point and maybe that constraint is not set to just look to the right side. Or possibly two end conditions and they are both solving and you are seeking the surface to establish the sidewalk point. I am leaning towards the first based on your picture where the two sidewalks share the same horizontal position for one point
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
3613008.itl
Template Library is attached.