Geopak SS3 Open Roads Target Aliasing issue

RE: Geopak SS3 Open Roads Target Aliasing issue

Sean Keene — Wed, 14 May 2014 21:59:47 GMT

I sent Ricardo the files I am working with.

I will try Adam's suggestion. In the pervious version I did not have to set the wall as a corridor reference. All that I did was reference the file to the corridor model drawing and the target alias function would see the wall as a target because the feature definition that is applied to the wall is a surface feature.

RE: Geopak SS3 Open Roads Target Aliasing issue

Adam Wieczorek — Wed, 14 May 2014 21:13:59 GMT

ok, it seams that in new 674 release it work fine if only mesh hac no volumetry. I created shapes on one siide of retaining wal and converted them to mesh elements, assigned feature definition and feture name, added mesh as corridor reference, set target aliasing and it started to work.

RE: Geopak SS3 Open Roads Target Aliasing issue

Adam Wieczorek — Wed, 14 May 2014 20:13:05 GMT

I can reproduce that issue with PowerInroads SS3 .674. The problem disapear in prior to .674 ss3 relase.

Ricardo, please keep us informed what are the results of this service ticket.

RE: Geopak SS3 Open Roads Target Aliasing issue

Ricardo Villegas — Wed, 14 May 2014 13:09:18 GMT

I am working with your support ticket 7000152182 regarding this issue.