[V8i SS3] Problems when placing text with Batch Process

I ran this in just MicroStation and text places fine. Can you try this in a blank file and see if you get the same results.

Hi. Thanks for the quick reply.

Actually, I might have found the source to this issue.

I am using Civil Accudraw with AutoLoad checked.

To make my script work as intended I need to do the following:

-Disable Civil AccuDraw

-Disable Civil AccuDraw AutoLoad

-Save settings and reopen the file (just to be sure)

This still feels like a bug though. I use Batch Process and Civil AccuDraw a lot, and disabling the AccuDraw feels like an unneccessary workflow.

Which civil product are you using?

I am using Inroads V8i SS3 (V08.11.09.674). Same problem with *.493

My Microstation version is 08.11.09.578

I am using Inroads V8i SS3 (V08.11.09.674). Same problem with *.493

My Microstation version is 08.11.09.578

I had this thread moved to the Road and Site forum so this issue that those familiar with Civil products could see this as well and assist.

I am almost able to reproduce your problem, and I would like to make sure I am able to do so before I log a defect.  Can you please view the attached video and let me know if your workflow differs from mine in any way?  Thanks.

https://bentley.sharefile.com/d/s2ee41df007c4501b

Thanks, Jaquelyn.

Your workflow looks quite similar to mine, although I use the Utilities→Batch Process tool with the predefined template. (When the script is complete I have to end the current/last command manually).

 As you can see, the extra characters do not appear on the first text elements. It also seems that the number of "words" in the junk text differs slightly between each text element.

Thanks. Nice to see that the problem could be reproduced.

Defect 110039 has be logged for this issue.

thanks Jacquelyn Pettus

Please send code batch Process to email hoangvandoai@gmail.com

Thanks