Hi,
We are using Microstaion 08.11.09.578 Geopak 08.11.09.674.
When we open the Cross Section model and Create cross section we see that the end condition of the reference model doesn't touch the ground.
I attached 3 print screenshots:1. In the first Screenshot we see our model in the center.
2. In the second Screenshot (The reference model) I made zoom in the left cut, and we see that the cut doesn't touch the ground.
3. In the third Screenshot, we see the cross section that we created and one can see that the cut doesn't touch the ground.
- These problem appears in all of our projects.
- We have checked in several computers and this problem appears in each computer.
- We have checked in earlier version's and we are getting the same results.
Please check, why doesn't the reference model touch the ground ?
Thanks, Assaf.
The problem lies in how corridors are made. When one makes a cross-section exactly on a interval, the line wil touch the groundline. If the interval of the corridor is smal, the gap is smal. The lines connecting between interval are strait, but the terrainmodel is changing between intervals. It' s something Bentley needs to enhance in the future.