Vertical Offset

RE: Vertical Offset

SREENIVASULU BACHU — Sat, 12 Aug 2017 12:00:39 GMT

Is it possible raising by quick alignment.

onlinerahulsingh — Tue, 15 Jul 2014 12:44:48 GMT

Thanks Jason & Purva

Jason Walsh — Tue, 15 Jul 2014 12:40:48 GMT

When in Vertical Alignment Design if you select Edit Alignment there is an option to raise the Vertical Alignment as shown in the screen shot below.

Purva Lakde — Mon, 14 Jul 2014 13:22:27 GMT

Can you try to keep scale factors X=1, Y=1, Z=1 and then check it.

onlinerahulsingh — Mon, 14 Jul 2014 12:22:21 GMT

Thanks Purva...

It worked for ground model....

but what about design profile....how it would be raised by 20 m....how all the IP will be offset in one go???

Purva Lakde — Mon, 14 Jul 2014 11:14:08 GMT

Thanks for your response.

The option is available in SS3 as well, please refer the attached snapshot below. You have to go through Modify > Copy > Scale and Translate strings.

onlinerahulsingh — Mon, 14 Jul 2014 10:57:51 GMT

Thanks Purva...

But there is no option like "MX> Modify > Copy > Scale and translate strings." in MXRoad SS3 and what about design line.

If I m giving a vertical offset to design line by using 120 option...it is not showing all IP raised by 20 m in Quick vertical alignment.

Purva Lakde — Mon, 14 Jul 2014 10:30:36 GMT

Please refer the below link for your reference.