I have moved my horizontal alignment annotations to avoid overwrites in Plan Production, but when I modify my vertical alignment; the horizontal alignment annotations revert back to the original location. Is there a way to disassociate the PC, PI, PT…

I want to know how to input 3D lines created by smart lines into alignment. Using vertical as this line, we will apply the 2nd alignment of the road to create a more natural model. I want to apply both horizontal and vertical as a complex element…

Hello, I have a planimetric lines (Edge of Shoulder/ Edge of Pavement) dgn file created using basic horizontal offset tools from an alignment attachment, I did some changes to the alignment (removing/adding PI's) and since then the planimetric dgn is…

In ORD, I created an alignment from a LandXML file (exported from Civil 3D). The alignment has since changed in Civil 3D, and I have a new LandXML file. Can I bring those changes into my ORD Alignment without recreating it? TIA, Adam

We've imported survey data and referenced our 2D alignment file. We are now trying to run a station offset report. First, it asks to select the alignment we wish to have offsets from and we do. Next, it asks to select the elements we want the station…

Hello, I am wondering if there is a way to turn a Complex Chain into an alignment with an active vertical profile. In other words, I want all of the yellow lines in the intersection drawing to have varying elevations associated with them. Currently…

I made some changes to an alignment and when I went back to the cross section named boundaries, all the annotation was off when reannotating them. It seems to be that they are annotating the wrong cross section in each XS cut. A cross section is annotated…

I am working on an interchange/urban expressway project that has around 20 alignments that all have some sort of connection to each other. We have separated them all into their own files, along with plan element and corridor files for each alignment.…

Hello, I'm working some alignments for roadway ramps and one of my baselines tied into an offset from the mainline centerline. That centerline was since edited/deleted but since my alignment was off of an offset from that line, it retained all of…

In ORD, I have a 10km road alignment, Start Station:0+000, End Station: 10+000 When I tried to revise the Horizontal Alignment between km 4+000 to 5+000, The vertical Profile Levels of the unchanged Horizontal portions also revised automatically. …

Hello, I'd like to annotate my alignment with the following information at the horizontal and vertical geometry points: - X (shouldn't be a problem) - Y ( shouldn't be a problem) - Z of proposed profile - Z of existing profile - Index number…

I'm new to ORD and I'm trying to convert microstation files to ORD. When I import a .gpk file with existing alignments, I go to set feature definition to the complex elements, the only option I have is "No Feature Definition". Do you know why this may…

Good Morning, See attached illustration (orange circled area). How can we place the "PC" text on the same line as the Station Text, or is it not possible? Thank you for your time,

Hi! I was setting up an item type so we could have some additional information connected to our road centerline, but when i assigned the item type to my centerline feature definition i ran in to some problems. First, when assigned it don´t seem to follow…

I am currently working on a large interchange project and am experiencing some weird results when generating plan named boundaries for a self intersecting alignment (e.g. cloverleaf). The left alignment in the image below is the subject geometry. I'm…

If I am getting a DWG file from preliminary design and after importing the DWG file to OpenRoads, how can I convert the Polyline of proposed alignment to the horizontal alignment and change its feature definition as per requirement?

Hello, I'm currently working in OpenRoads SS4 annotating some alignments. I finally figured out how to get Auto Annotation to work but now I'm running into an issue. The automated annotation is not showing the correct stations. The alignment I'm having…

Hi good day to all, iam very new in Bentley applications. I created some alignments and surface. After that when I am trying to create a profile, it shows “NO TRANGLES FOUND IN SURFACE” could anybody please help. Regards DK

Hello, I am designing an intersection using ConceptStation for a conceptual study project. I am trying to model both roundabout and stop-controlled intersection options for comparison. I haven't been able to successful create a roundabout. I tried creating…

Hi Im getting the following problem whenever i open a 3D drawing with horizontal alignments. The error only occurs when alignments are present and does not seem to affect all computers. It continually pops up until the drawing eventually crashes. …

Is the tool broken? I am using the same template, very simple, CL/EOP/SHLDR/SLOPE/EC1 Template drop 1 (100') Template Drop 2 My intent is to vary the Shoulder Width and the Slope values. I have attempted this with 2 templates with different values, Same…

Hi guys, I have a problem with changing style for a big number of alignments. In my Geometry file I have around 100 of horizontals for troughing and 100 for cables lines. Everything with Default style :( I need to display only part of this Geometry…

First time using Power GeoPAK, we have an alignment file that was provided to us by another consultant, and we need to edit the station labels so they are clos to the tick marks. I'm having trouble finding where that setting is. See sta 1340 in the attached…

I am having an Issue with my horizontal alignment - stationing annotation. I am working in a projected LO and using the feature definition Geom_CL for my alignments. When turning the Auto annotation "True" the stationing generates approximately…

Hi all, I am a bit of a novice to in-roads (am using PowerCivil SS3) and have yet to find out how to achieve this... I have a horizontal alignment (control line for path) that I have draped to a surface, but I want to modify the vertical alignment…