When annotating surfaces in the new openroads cross sections, there does not appear to be a way to control which points get labeled - it is all or nothing. The only control appears to be not annotating points within a certain distance of each other, but…

Hello, I need to annotate an associated string (ditch) in profile view with its level and chainage of reference string (annotation along a string - not in box). I've tried 059, but it's annotating a cumulative length of an associated string that differs…

Hi We are just starting out with SS4 after using SS2, we are struggling to get the plan and profile generator under the drafting tab to pick up any alignments even though we have corridors, profiles and civil cells already active in the dgn. I'm suspecting…

MicroStation Version 08.11.09.608 Bentley InRoads Suite V8i (Select Series 3) V08.11.09.722 Hello, I am trying to place a note having; Sta,Off, Vet Elev (Proposed). Shown below is the note text I have set. {STATION} {Delimiter} {OFFSET} EL.…

Its been a bit since I have posted here, so your patience is appreciated..... About a year or so ago, I had gotten my horizontal alignment stations and labels to annotate at a MS files defined annotation scale. Using the subject version, I am no longer…

I have created cross sections using Geopak SS3 08.11.09.674. (Corridor method) I am attempting to label the elevation of specific points. The “Annotate Label” function is not allowing me to select a specific point. No points appear under the "Crossing…

Hi, I am wondering if there is a way in Inroads or RailTrack to show alignment connection points in profile. To better explain the scenario, lets say I have a main alignment "Track 1" and five additional alignments (Tracks 2 to 6) that branch out from…

Hello Fellow, I am amazed by the interesting technology which keeps pouring out of Bentley team of developers. So far as I know I haven't seen any example where cross-sectional levels at vantage chainages are displayed as shown in the attached drawing…

Hello All, Let me start with a description of the work.. Approx. 130 Miles of Proposed Track to run along existing Track. Approx. 260 Grade Crossings. Is there anyway to automatically import Track Vertical Elevation for each Cut of Roadway Grade…

I recently watched a You Tube video on how to make horizontal and vertical geometry automatically annotate. It would be nice to be able to have cross sections auto-annotate in this same fashion (have the sections annotate at the time they are created…

Has anyone had success getting this to work in SS2. Thought it might be fixed by this version. Had it working with text, cells, points, etc., then maximised the view and now instead of 50 scale the elements are 600 scale, i.e. 12 x 50. what happened?…

I've used Geopak for the last 15 years and I've often thought that at some point the Plan View Labeler would include the functionality to label the beginning and ending stations of an element (i.e. a line, linestring, chain, or shape). There are MANY…

Hi, Anyone experienced with MX tip files and using them to produce drainage profiles. I have it neally looking how I want, but not quite there. I want to show the pipe grade above the datum and I can do this, however when doing this it centre aligns…

I am trying to use the GPK Corridor Modeler's Cross Section Labeler and it is giving me issues. I haven't used it in about 6 months, during which time I have made updates to Windows, MicroStation, and Geopak so it is a little tough for me to figure out…

I need guideance on cross section labeling. I have an “X” that shows on my Geopak SS3 cross sections. When I annotate the sections, I do not want to annotate slope to that point. How do I remove the “x” and not annotate the slope? Where is…

Hi, I am unable to fix the datum in drawing profile and then annotating it with mxtip file. I have tried several combination in fixing/rounding datum but it didn't work. Please advise. Rehan

I was wondering if anyone knew of a good way to annotate structures in a Drainage Profile. I would like to get all of my inverts labeled at each inlet or manhole and have it display the pipe size at for each of these pipes. I have been able to get the…

I am confused how to create cross sections sheets with annotation using Geopak SS3. Using the Create Cross Section tool the following Preferences are offered. Create Cross Sections Create Cross Section Preferences Sheet Sheet – w/o Grid…

Is there a way to annotate the event points that includes the description of the event? When I annotate the stationing, all of the events show up as "EVT XX+XX.XX" and I have to manually edit each one to include the description of the event. Each time…