I have been looking for this for a long time, and now it's time to ask the question to the people who might know the answer. I work with several seabed DTMs and often create profiles to view vertical shifts. Mostly I have one design survey with lots…

Hi Dears, I am using MX Road V8i Select series 2. I have to make a design for four laning road. I have one Center Line and 2 Median edge for both sides. The problem is how we can show both sides median edge as FRL in L-Section. May kindly be reply…

v8i.: 08.11.07.443 / IR: 08.11.07.566 / Window 7/ NYC I have a drawing with a plan on the top, a match line and continuing with a plan on the bottom. The top plan containing a horizontal alignment, has reference files attached in the correct coordinate…

Hi, Anyone experienced with MX tip files and using them to produce drainage profiles. I have it neally looking how I want, but not quite there. I want to show the pipe grade above the datum and I can do this, however when doing this it centre aligns…

I'm working on a project where I have a lot of spot elevation callouts and text masking is necessary. When I place the plan note, the text mask it there, no problem. But when I've had to update the notes recently, the text looses it's mask. When I update…

I need guideance on cross section labeling. I have an “X” that shows on my Geopak SS3 cross sections. When I annotate the sections, I do not want to annotate slope to that point. How do I remove the “x” and not annotate the slope? Where is…