• How to convert Thematic Height Display in DGN format to DWG?

    Hi, Is it possible to convert a DGN with Thematic Height Display (Delta Terrain) to DWG without loosing the display style? Thematic Height Display needs to be brought into GIS. Using OpenRoads. Thanks.
  • Excavation plan with ORD 2020

    There are different excavation depths and different excavation slopes on the basis of the building, whose photographs I have attached. I prepared this excavation plan with Civil3D. How can I make such an excavation plan with openroads? I have to work…
  • ORD Cross section Components vanishing when exporting to dwg for AutoCAD.

    I am using OpenRoads Designer CONNECT Edition - 2020 Release 2, and AuoCAD 2020. Any advice and help would be appreciated. Regards
  • CADD Operator: MicroStation and AutoCAD Rhea Engineers & Consultants, Inc. – Valencia, PA

    CADD Operator: MicroStation and AutoCAD Rhea Engineers & Consultants, Inc. – Valencia, PA Company Founded in Pittsburgh, Pennsylvania in 2001, Rhea Engineers & Consultants, Inc. (Rhea) is a 100 percent woman-owned professional corporation providing…
  • Error referencing AutoCAD files...

    I am running FDOT SS4 MR11 and I am getting an error when I try to reference a .dwg file sent to me by a sub-consultant. The error says that the file type is not supported. I am also running the most recent version of RealDWG. My early research tells…
  • [MX SS4] DWG export - model as layout

    Hello, I moved to MX SS4 and encountered a problem with export to DWG. While saving a cross section drawing to DWG a content is moved to AutoCAD layout instead of model. I suppose it is connected with some settings I don't know (I don't work on MS)…
  • MXROAD Genio File Format Cross Section Editing on Autocad

    This tool is for edit MXROAD genio file format cross section and InRoads pen code format cross section on Autocad. 720p HD format video is available at, http://www.youtube.com/watch?v=eWD-tBKia28
  • InRoads Survey XM w/ AutoCAD & bylayer linestyles

    Running InRoads 8.9.2.16 inside of AutoCAD 2008. When writing Survey Data to Graphics, the linework is taking on the bylayer linestyles instead of using the bylayer settings. If I set a linestyle, it uses that linestyle, even if the layer's linestyle…
  • Re: Conversion of MX Strings into Lines and Arcs

    Here you go. I've made an explanation file here . Hope it's undestandable. Good luck, v.
  • survey/International feet

    While referencing a dwg in survey feet into a dng it appeared to be off about the amount that the survey & international feet differ - about 6' in a million. Using state plane coordinates with northings in the 700,000 range and eastings in the 1,700,000…
  • Multiple Users Platform & Surface Simplifier

    Hello Everyone Our Company is evaluating to change the civil works platform to bentley (Currently we are using Autodesk Civil 3D) and one important thing we must know is if Bentley PowerCivil works with multiple user platform (one DB and several users…
  • AutoCAD platform

    Does Bentley InRoads Site V8i currently support the AutoCAD 2013 platform? If not, when is this likely to occur and is there a commitment to continue supporting progressive AutoCAD platforms in future?
  • MX V8i SS1 - DWG (R2010)

    Hello, I have installed MX V8i SS1 and it is possible to start MX in AutoCAD 2010. That is fine, but how do I reference a DWG (R2010 format) in MX. Now I have to make a saveas to R2007 of my DWG before reference this drawing. With regards…
  • Bentley Civil Platforms

    Hi, my company is about to make the leap and buy one of the Bentley Civil packages. I'm the only one in the office familiar with Bentley, and I have never used anything other than plain old MicroStation. I've requested information from and had come contact…
  • Geopak Plan and Profile Sheets

    I need to create plan and profile sheets that will mimic Autocad viewports. Does anyone have any hints?
  • InRoads starts in AutoCAD

    Yesterday I had my Microstation V8i updated to version 08.11.07.171. We also changed to a new workspace, so my config files are different than they were Wednesday. After the update: When I start InRoads from a desktop icon or from the start menu…
  • Re: MX: Curves to AutoCAD

    Chaps, 'plogies for the delay but I've been on leave and the desire to check up on the forum has not been at the foremost of my mind! I have, for many years now, only used AutoCAD drawings in 2D due to CAD limitations (fillet and the like…
  • Re: Associating CAD model with MX

    Aleksander, Sorry for the false hope but I have no solution to this frequent problem of mine. Sometimes changing display and back again (several times) "solves" the problem. In my scenario, I'm trying to open a DWG from the CAD menu, but the drawing…
  • Cross Section Output

    Hi guys, My boss has asked me to look into this one. A Contractor on a recent job informed him of receiving a Cross-Section package of 11x17 drawings with each cross section on each individual sheet, containing all volume and annotation information…
  • Re: MX V8i ss1 - AutoDesk Object enablers

    Gunther, Please check the wiki page I just added. I believe this will help you out. Remember (SELECTseries 1) Products require you to download "Bentley V8i (SELECTseries 1) - Autodesk Real DWG 2010". Another note MicroStation (SELECTseries 2) delivers…
  • Re: InRoads in 64bit OS?

    Steven, InRoads on AutoCAD in a 64 bit operating system is not supported. This is noted in both the Requirements and Known Issues of the readme. I apologize for any inconvenience. Thanks, Jason Smithey
  • Civil 3D Pipe Network Conversion

    My company is trying to develop a way to utilize the intelligent Civil 3D Pipe Networks, but we are required by most of our clients to display all of our data in a 3D model in Microstation. I am trying to create a workflow to convert Civil 3D 2012 Pipe…
  • Re: InRoads Survey XM w/ AutoCAD & bylayer linestyles

    InRoads Group V08.09.03.06 is basically a service pack. They are no longer referred to as service packs because you can now install them by themselves without requiring previous builds as was the case in older versions (e.g. InRoads V08.05.00.00 had to…
  • SKD Sample Project for InRoad V8i with AutoCad in VB.Net

    Hi Dear Friends, I am Trying to Develope an Application for Customarization/ Integration of InRoad V8i with AutoCad in VB.Net with Visual Studio 2008 as programing environment according to Project Specific Task automation. But I did not…
  • Re: Project Defaults in AutoCAD?

    Chuck, We are not aware of any AutoCAD configuration variables that can be used in Project Defaults. I double checked with development and it was confirmed that the code only looks for the MicroStation configuration variables. If desired, please…