• Design Cross Slope report values is not matching.

    I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

  • Cross Section Annotation - Minimum Elevation Difference

    I am using Power InRoads V8i (SelectSeries 2). Is there a toggle in the cross-section annotation that would stop both elevations being displayed if they are within 0.01' of each other? The way I have my template set up, is I have a 'ditch check' point…

  • Cross Section Element Annotations

    Hello, I am trying to annotate an element in my cross-sections so that it updates automatically when my corridor changes. Specifically, I am trying to annotate the bottom elevation of a swale so that when the elevation changes, the label moves with…

  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, I searched and could not find a request for this functionality. If desired, please file a change request through: http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey

  • Re: Inroads Update Cross Section Notes

    Ryan, Which specific notes are you updating in which this problem appears? I get the same behavior with both Single From Graphic and All. Thanks, Jason Smithey

  • Can I set a "redefinable" variable equal to a "define_dgn" variable in GEOPAK criteria?

    If so, what is the syntax? I'm trying to get something like this to work: define_dgn "string1" \ dgn = C:\string1.dgn \ lvname = string1 define_dgn "string2" \ dgn = C:\string2.dgn \ lvname = string2 if x >0 then _s_string = "string1" …

  • Inserting name of surface in plan, profile and cross-section

    I have been looking for this for a long time, and now it's time to ask the question to the people who might know the answer. I work with several seabed DTMs and often create profiles to view vertical shifts. Mostly I have one design survey with lots…

  • Re: InRoads. X-sections anotation problem

    Corey, The problems that I noted should only be in V8i. If you are having problems then you may want to contact support with your dataset. Also, it may not fix your collision free text problem but you should upgrade to version 08.09.03…

  • Geopak Survey

    Any chance of adding Cross Section Navigator to future versions of Geopak Survey? We find that the surveyors would use this tool often if it was included in Survey.

  • Corridor Modeler Cross Section Labeling error "Object variable or With block variable not set"

    When I try running the cross section labeling tool out of the Corridor Modeling window I get an error Run-time error '91': Object variable or With block variable not set I have the options to "End", "Debug", or "Help" "Debug" opens VBA…

  • Re: Inroads - Volumes from Custom X-sections

    End area volumes are not computed on skewed cross sections. Thanks, Jason Smithey

  • Re: Profiles

    Charles, Please see the following posting: http://communities.bentley.com/Products/Road___Site_Design/f/5922/t/22389.aspx Thanks, Jason Smithey

  • Re: Custom Cross-Section Set

    On the General leaf, enter a number larger than the span of your alignment for the interval. I sometimes just enter 1,000,000. On the Controls> Critical Sections leaf, turn off all of the options that you do not want. See the help file for an explanation…

  • Re: Inroads Update Cross Section Notes

    Ryan, I have reproduced your problem and filed D-37693. Thanks for reporting this. Jason Smithey

  • Slopes on Cross-sections

    Hi Guys, I'm wondering if you can help... We're currenly working on a design and build job, which consists of a number of Treatment Areas that need to be dug out and replaced because the existing road base/surface has failed. Now, because some…

  • InRoads XM 08.09.02.16 and 08.09.03.06 Annotate Cross sections, Balance pull down menu not working properly?

    In version 08.09.01.45 Negative shoves all the annotation to the left of the initial point, Positive shoves it to the right, and Equal is supposed to array them out from the middle point. In 08.09.08.06 and 08.09.02.16 the "Equal" seems to be broken.…

  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, Go to Drafting> Place Cross Section Note. In the bottom, right hand corner of the dialog, click the black arrow to expand the dialog. Under Inserts, you should see Storm and Sanitary Structures. Add the desired inserts to a new or existing…

  • Annotate Sections - Areas without points

    Hi guys, Recently we came upon a problem where the contractor wanted us to report on changes in the elevation of the existing surface, areas where we had no determined points. The image below shows the OG and our Muskeg surface. The below…

  • Corridor Modeler Template display - slopes

    When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…

  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…

  • SS3 Geopak - "Solid by Extrusion Along" not appearing on cross sections

    I created a 3d element using "Solid by Extrusion Along" The element represents a pipe with thickness. I have the element displayed while creating cross sections but the element does not appear. I created a solid pipe and it does appear. …
Communities
Support and Services
Training and Learning
Social Media