I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

Yesterday I worked in a cross section model and annotated it. Yesterday, my only issue was that my Cross section Navigator didn't work. The error below appears. -the cross section cell was in place and i am in the correct gpk Today when I went…

I am trying to label cross section that I already have drawn. When I click the 'Cross Section Labeling' button, I get the error "Job number cannot be found in the active directory." and prevents me from labeling cross sections. Anyone familiar with this…

Using the corridor modeler, I've created cross sections and I'm trying to label them. I've created my label styles and when I 'Draw Labels', all of the labels overlap on the top cross sections and don't label the cross sections below. I'm doing columns…

Using the corridor modeler, I've created cross sections and I'm trying to label them. I've created my label styles and when I 'Draw Labels', all of the labels overlap on the top cross sections and don't label the cross sections below. I'm doing columns…

Is there a way to find surface areas of fill at specific elevations using the 3d model? For instance, we are designing a service road that will have 15-25 foot of fill and we need to use a chemical compound to make the compaction quicker. They are going…

Good day everyone, I'm trying to model a roadway that has a parabolic crown cross section. I do not see in the standard templates a parabolic template other than the regular simple constructs. If anyone has an idea of how to go about creating one…

This is happening on the latest 2 versions of SS4. In our cross sections, we are having the point ('X') disappear which compromises our ability to annotate. It is not all points in the cross section and often a cross section will display one point but…

The GeoPAK tools conveniently have a tool that creates a *.geo from channel cross sections that may be directly imported into HECRAS. I know that ArcGIS has a piggy-back program called HECGeoRAS that creates the same file type, but I haven't had much…

Hello, I am using Geopak SS4 and I am trying to get earthwork values similar to legacy Geopak products. I have created proposed corridor models and an existing conditions model using surface templates (existing pavement, topsoil, sidewalk etc.) and…

I have cut cross sections using Alignment A to generate the patterns, cells, and existing ground. I then wanted to generate proposed cross sections on Alignment A's cross sections using Alignment B (which has its own profile). I did just that but geopak…

I have a client who requires cross section to be at scale 1"=5'. How do I make available / create a 1"=5' scale option? Where do the standard options reside? Thanks, Philip Mashuda

I am using the Draw Ancillary Features tool to draw existing utilities into my cross sections. I'm referencing a mapping file and using level symbology as the the search mechanism. Most of the cells are coming in correctly, although on some cross sections…

I am attempting to show existing storm drain pipes on the sections. I created features and element templates for the pipes. The element template uses a cell for the pipe. Everything appears correct in the cross section view in the modeler. The pipes…

Good afternoon, I have been using GEOPAK for several years but now have been assigned to develop very detailed and technical interstate cross sections. The template is a divided reconstruction independent design. I have all the plan, profiles, and…

When plotting ancillary features on cross sections, my Microstation session crashes for miscellaneous reasons. Here are a couple of examples: Loading a .afd file Deleting an existing entry In the display settings, changing the selection from …

Good morning all, I am having an issue with GPK drawing my surfaces that I produced from Roadway Designer. When I am in RD, I can flip through the stations and the existing surface and proposed surfaces and information look good. I will then use the…

I noticed that in V8i, if I swithch from my xs file to my pattern line file and change the color of a pattern line, and also change my input file to only run xs on this one different colored pattern line, GEOPAK won't find the pattern line unless I exit…

I created a 3d element using "Solid by Extrusion Along" The element represents a pipe with thickness. I have the element displayed while creating cross sections but the element does not appear. I created a solid pipe and it does appear. …

I have a designer attempting to generate cross sections using yellow pattern lines. He receives the error message "There are no Cross Section Cell to process with regards to current settings." He then changes only the color of the pattern…

Does anybody know of an easy way to plot low points on X-sections, like ditch bottoms, on the roadway profile? Right now I use Active Chain Control and multiple View Windows to do it but it takes quite a bit of time. Thanks, Aaron

When Corridor Modeling and showing cross-sections I was having the issue of a certain surface feature always drawing on the active level rather than the level that it was supposed to as defined by an Element Template. This is supposedly happening because…

I am a new geopak user and am attempting to label cross sections which I have cut using my existing ground surface and my finished grade surface generated using the corridor modeler. I have tried three different ways to label the elevations and offsets…

An issue came in today that I think will benefit the community to see troubleshooting techniques as we work toward a resolution. We are seeing discrepancies in some cases between what the modeler will show as a point offset value (or elevation) and…