• OpenRoads Earthwork

    Hello, I am using Geopak SS4 and I am trying to get earthwork values similar to legacy Geopak products. I have created proposed corridor models and an existing conditions model using surface templates (existing pavement, topsoil, sidewalk etc.) and…

  • Control which points get labeled in OpenRoads Cross Sections

    When annotating surfaces in the new openroads cross sections, there does not appear to be a way to control which points get labeled - it is all or nothing. The only control appears to be not annotating points within a certain distance of each other, but…

  • OpenRoads (MX SS3) Cross Sections not pulling in reference terrain

    Good afternoon everyone, I have an issue generating cross sections in MXROAD SS3. I click the Corridor Modelling R2 button Then select the alignment string (which is referenced in) Load the preferences Select the cross section(s) required…

  • Openroads not keeping symbology of cells when cutting crossing sections

    We have cells that have different linestyles (using the built-in linestyles) within them. The cells look correct while viewing within OpenRoads, however, when exporting to native Geopak Cross sections, all linestyles are put to solid lines. Any suggestions…

  • OpenRoads SS3 placing non-annotation cells as annotation cells?

    I've come across an issue when cutting actual cross sections back to native Geopak, OpenRoads is placing the defined Point Cells as annotation cells, regardless if they are actual annotation cells in the cell libraries...is anybody else having this issue…

  • Re: Sectioning Strings in Line Mode.

    Addis If you use different pavement layers applied between strings you can control the shape of the earthworks outline to approximate the desired section string you require as shown in the example below. While it may not be exactly as you require…

  • Cross section labeling - Geopak SS3

    I need guideance on cross section labeling. I have an “X” that shows on my Geopak SS3 cross sections. When I annotate the sections, I do not want to annotate slope to that point. How do I remove the “x” and not annotate the slope? Where is…

  • GEOPAK SS3 Model - Feature Definition drawing on Default level

    When Corridor Modeling and showing cross-sections I was having the issue of a certain surface feature always drawing on the active level rather than the level that it was supposed to as defined by an Element Template. This is supposedly happening because…
    • 3578_corridor.dgn

  • GEOPAK SS3 - XS Sheet Label Symbology

    I am trying to use GEOPAK SS3 for a production plan and here is my latest issue. I cut XS cells successfully in SS3. I then used GEOPAK SS2s cross-section sheeting tool while in the same MS session launched with "Load_GEOPAK_SS3=1" used. Nearly every…

  • Geopak SS3 - Is there a way to Annotate the Cross Sections while using the "Sheet" option?

    I am confused how to create cross sections sheets with annotation using Geopak SS3. Using the Create Cross Section tool the following Preferences are offered. Create Cross Sections Create Cross Section Preferences Sheet Sheet – w/o Grid…
Communities
Support and Services
Training and Learning
Social Media