I am creating a boat load of cross sections in multiple files. While the cross sections themselves are coming in fine, when they are laid out on the sheet, they are uncentered and its quite tedious to have to keep manually re-entering a 100+ sheets (especially…

Hello! Does anyone know a way to shift a cross section named boundary in the drawing model? In this example, I simply want to shift my named boundary down in order to center my section better without having to recut a new named boundary. This is in…

Hi. I'm using PowerCivil. After creating cross-section at different chainage points, I need to annotate them as in the sketch below: in points, marked with red arrows, I need to specify point's distance from the central axis and the elevation. I also…

Hello, I'm using Openroads Designer and am trying to update named boundaries for cross section views. I added a 3D feature line in a reference file that is set up to display a cell when shown in cross section view (more specifically, a right-of-way…

Hi. I'm using PowerCivil. How can I insert independetn line in cross section, I mean - I need a vertical line (no matter what the "h" is), which consists of two defined points, where bottom point follows (defined in point control) to linear geometry…

We are using OpenRoads to generate plan/profile and cross section drawings within a Projectwise environment. The sheets are created within and OpenRoads 2D model seeds. To allow for Projectwise to generate pdf renditions, the file must be saved and…

As you can see below the offset's are not correct. I only have it displayed to the 10th but it is off by 0.0615088. The elevation is correct. The offsets are suppose to be 4.0' and 17.0' each side of the center line. I don't know if I need to…

Does anyone know of a way to verify the numbers we're getting for earthwork? Either by EAV or prismoidal? I have lobbed the question out here before, but the only way I know to check is to check the drawing cross section model and use the 'flood' option…

Yesterday I worked in a cross section model and annotated it. Yesterday, my only issue was that my Cross section Navigator didn't work. The error below appears. -the cross section cell was in place and i am in the correct gpk Today when I went…

Hello all. I am and FDOT user making the switch from SS10 to ORD Connect edition. I know that the cross sections are stored in the model, however, if we have to add specific features at one specific cross section, how do we do so without manipulating…

Hi Everyone, I am currently trying to export my cross sections from open roads designer to DWG auto cad format. However no matter what setting I try on my export the DWG files seem to contain the 3D model (as shown) I have tried disabling 3D settings…

Hello, I updated my XS annotation group in the .dgnlib file at this location (C:\FDOTConnect\Organization-Civil\FDOT\Dgnlib\Feature Definitions) But when I cut my cross sections, it doesn’t reflect all the changes I made. How can I make the…

Hello, I updated my XS annotation group in the .dgnlib file at this location (C:\FDOTConnect\Organization-Civil\FDOT\Dgnlib\Feature Definitions) But when I cut my cross sections, it doesn’t reflect all the changes I made. How can I make the…

Hey, Has anyone else ran into this problem? I'm using the same cross section annotation on every one of my models, and sometimes the EAV table populates and other times the EAV table does not populate on the cross section. It will be along the same…

Hi Everyone, Our firm is having a recurring problem with our cross section labeling. We are creating our cross sections from corridor models. Once we have the cross sections cut, we only have 50-75% of the necessary cross hairs populated to annotate…

I am migrating to ORD from SS10. One thing I'm missing for cutting XS sheets is the XS from linestring tool that was available in SS10. I'm needing to cut a cross section at a proposed culvert that is on a skew and I would like to have the XS also show…

Hi, While exporting Cross sections to dwg format, EAV Table values are showing 0 in dwg file. Please suggest any solution for this error. Thanks in advance, Mintu Mondal

I have a couple of quick questions regarding cross section annotation groups and the use of dimensions. 1. As you can see the dimensions have open arrows. Is there any way to make these arrows closed? The element template references a dimensions style…

I am struggling with the annotation in my cross section sheets. I have a lot of questions, listed below, if I can get answers to any one of them that would be greatly appreciated! Here is a sample of my XS. 1. I have the same template drop for…

We’re trying to label our cross sections, and we are using a preset annotation group. For some reason we cannot get the tie in slopes to display. We tried using the “create list of segments tool” and that doesn’t seem to work right either. When I apply…

Hello I am working in ORD for the first time and cannot find any tools that were similar to the Cross Section Navigator tools that were available in ss10. Are there any tools that I can use to create working lines in the cross section view? We want to…

Hello everyone, I was hoping I could get some assistance with 2 issues I am currently having. I am new to the program. 1) Is there any way to automate the process of labelling utilities such as Buried Fiber Optic Cable and Buried Electric on cross…

Hello, I am trying to annotate an element in my cross-sections so that it updates automatically when my corridor changes. Specifically, I am trying to annotate the bottom elevation of a swale so that when the elevation changes, the label moves with…

All, Is there a way to annotate more than one terrain in Cross Sections? Thanks

I am trying to label cross section that I already have drawn. When I click the 'Cross Section Labeling' button, I get the error "Job number cannot be found in the active directory." and prevents me from labeling cross sections. Anyone familiar with this…