• Design Cross Slope report values is not matching.

    I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…
  • Cross Section Annotation - Minimum Elevation Difference

    I am using Power InRoads V8i (SelectSeries 2). Is there a toggle in the cross-section annotation that would stop both elevations being displayed if they are within 0.01' of each other? The way I have my template set up, is I have a 'ditch check' point…
  • Civil Accudraw in XSC

    Is there any way to get Civil Accudraw to work in XSC mode? I have a few things that i miss from the old civil accudraw in Microstation, but that's another topic. The main thing is the locking from one view mode to another. I know ORD uses models in a…
  • CrossSection view issue

    Hi. I'm using PowerCivil software. When I create horizontal alignment, template, vertical alignment and corridor, whenever I open CrossSection view, I'm unable to see any lines that would see me the existing relief line and crosssection's lines. Though…
  • Cross Section Element Annotations

    Hello, I am trying to annotate an element in my cross-sections so that it updates automatically when my corridor changes. Specifically, I am trying to annotate the bottom elevation of a swale so that when the elevation changes, the label moves with…
  • Inroads Losing Modeller Functionality

    Hi, First time asking a question on Bentley Communities. Recently I noticed that the Site modeller functionality of my Inroads is no longer available and I did not see it in the Add-Ins window. This mostly affects cross sections and corridor work…
  • End Area Volume - Classifications

    I am running InRoads SS4. I am trying to calculate cut but only in a certain part of the road. I have changed my template so I can ignore the components I need to in order to get that certain section. My issue is the following: there is a column in the…
  • Cross sections displaying incorrectly

    I am trying to display crosssections for a stretch of highway we are designing. When the crosssections display, they turn out as shown in the picture below. We have tried several different things, thinking that we had inadvertently clicked something to…
  • 'Can not find cross section sheet dgn file:' Geopak Cross Section Sheet Composition

    Good morning, laying out cross section sheets and was able to a few days ago just fine and now I'm getting this error 'Can not find cross section sheet dgn file:' I learned the hard way that if I input my design file into Sheet DGN File it'll process…
  • Errors in XS labeling tool

    I am using SS2.615 and labeler is working erratically. Sometimes it will label the text id sometimes it won't. Rerunning the labeler and its still not labeling the same label. Copies of this text element have been placed multiple times with some working…
  • InRoads XM 08.09.02.16 and 08.09.03.06 Annotate Cross sections, Balance pull down menu not working properly?

    In version 08.09.01.45 Negative shoves all the annotation to the left of the initial point, Positive shoves it to the right, and Equal is supposed to array them out from the middle point. In 08.09.08.06 and 08.09.02.16 the "Equal" seems to be broken.…
  • Problem with my Xin

    Hi guys, I was working on my xin, trying to create a 11x17 section sheet in my cross section preferences, and now the axis text for my standard roll is about 200 times bigger than it should be. Using an old Xin I have been matching the setting and…
  • InRoads Drainage - Crossing Features

    Just curious, thanks in advance... Using MicroStation V8i SS3, V08.11.09.397. InRoads V8i SS2, V08.11.07.615. Multiple sections, files, and users experiencing the same issue. After creating a storm system SDB for a proposed drainage network, I'm…
  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, Go to Drafting> Place Cross Section Note. In the bottom, right hand corner of the dialog, click the black arrow to expand the dialog. Under Inserts, you should see Storm and Sanitary Structures. Add the desired inserts to a new or existing…
  • Annotate Sections - Areas without points

    Hi guys, Recently we came upon a problem where the contractor wanted us to report on changes in the elevation of the existing surface, areas where we had no determined points. The image below shows the OG and our Muskeg surface. The below…
  • Corridor Modeler Template display - slopes

    When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…
  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…
  • Cross Section Component Display

    I am using Inroads V8i (Selectseries 2) V08.11.07.428 When cutting cross sections with this version of inroads components are not displayed if any point within that component is not within the left and right offsets of the cross section. You would…
  • SS3 Geopak - "Solid by Extrusion Along" not appearing on cross sections

    I created a 3d element using "Solid by Extrusion Along" The element represents a pipe with thickness. I have the element displayed while creating cross sections but the element does not appear. I created a solid pipe and it does appear. …
  • Inroads Cross-section offset issue

    I've created a divided highway which is 18.75m offset from the center median. My corridor is based off the median alignment with no vertical. I've used point controls to offset the roadway 18.75m horizontally and my vertical offset is the vertical alignment…
  • Single Instance End Condition Problem and Design Stages

    The term “single instance end condition” probably isn’t an official term. So I will describe it before asking for addition help. A single instance end condition problem occurs when you have a template that has multiple end condition solutions and when…
  • Re: Custom Cross-Section Set

    On the General leaf, enter a number larger than the span of your alignment for the interval. I sometimes just enter 1,000,000. On the Controls> Critical Sections leaf, turn off all of the options that you do not want. See the help file for an explanation…
  • Re: Inroads Update Cross Section Notes

    Ryan, I have reproduced your problem and filed D-37693. Thanks for reporting this. Jason Smithey
  • existing surface grade filtering slopes? Any ideas?

    I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…
  • Slopes on Cross-sections

    Hi Guys, I'm wondering if you can help... We're currenly working on a design and build job, which consists of a number of Treatment Areas that need to be dug out and replaced because the existing road base/surface has failed. Now, because some…