• SS2 and SS3 DTM Visibility Tools - Drape on TIN - Offset Height

    I am using a tool called "Visibility Tools" Found under DTM==>Analysis==>Visibility I have found that the "Offset Height" under "Drape on TIN" does not work in SS2 or SS3. The tool does work in V8 Philip Mashuda

  • Inserting name of surface in plan, profile and cross-section

    I have been looking for this for a long time, and now it's time to ask the question to the people who might know the answer. I work with several seabed DTMs and often create profiles to view vertical shifts. Mostly I have one design survey with lots…

  • Line strings to shapes

    I want to mesh all components in a design file but I've noticed that only shapes can be meshed. In other word, outlines of the design that are made of line strings can not be meshed. I thought I could just convert all line strings in a DGN file to…

  • Re: 3D polyline from DTM

    Try the Surface> Design Surface> Drape Surface with Tools> Locks> Locate set to Graphics. At the top of the Drape Surface dialog, the Current Locate Mode should display Graphics if the lock is set correctly. Click the Help button on the dialog for more…

  • Re: Flipping Triangles

    Chuck, The Surface> Edit Surface> Change Triangle Edge command is available in the currently released Bentley PowerCivil for North America product. That must have been the readme that you read. It is also in InRoads Group SELECTseries 1 that is…

  • Help needed DTM advice

    Hi peeps, This is my first thred and im in need of some help. Im doing my dissertation at university around DTM and have now got my self involved in Bentley microsation software. Ive installed GEOPAK so i have acess to DTM tool section. …

  • surface design

    i have an existing surface (dtm) and i am putting in a proposed concrete pad at a certain elevation. i want the pad to tie into the existing ground at 2 to 1 how do i generate a new proposed surface showing the 2 to 1 slope .

  • How to show Low/High Points of a Surface (dtm)

    Hello there! I have this issue, when i was done creating a surface (dtm) using Inroads, i wanted to view the low/high points of that surface, so is there any way to view them using InRoads??? Thanks & Regards, Imad Balich

  • Contours Smoothing Method

    Hello there, I just have a simple question, is there any way that we can choose another method of smoothing of Contours in Inroads , for example in Geopak we have more than one one method of smoothing as shown below: Thanks...
Communities
Support and Services
Training and Learning
Social Media