• End Condition Exception Not Following Horizontal Feature Constraint

    I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…
  • End Condition Exception - Components Distorted

    Hi I have a template with pavement layers extended to End Conditions. I have applied end condition (Override) and removed "check for interception" from fill component. The constraints of the marked points are getting removed in the end condition exception…
  • ORD Error in top mesh

    Hi, We're having problem with top mesh going across the corridor in some areas where End Condition Exception (I've got number of ECE but the issue is only in few locations) is applied. Does anyone come across this? Any idea what may causing it? Is it…
  • End condition exception and linear construction limit both showing.

    My template is set up with priorities to solve for several cut and fill conditions. The guardrail end condition has the highest numerical priority and solved last. Naturally, this creates "pockets" of the guardrail shoulder condition along a corridor…
  • Template End conditions

    Hi all I have a template end condition problem. When i view the cross sections it shows the entire drain on the LHS even when the NGL is sloping away from the template. So iv tried some display rules to stop this which works when testing but not in…
  • [OpenRoads] End Condition Exceptions: Transition type

    Hi, I would like ask for help with understanding transition functionality available under End Condition Exceptions. I have two end conditions that differ significantly: embankment and embankment with benching. I’m trying to introduce a transition over…
  • V8i SS2 End condition exceptions issue

    The template I am using in InRoads has four end conditions. A variety of fill slopes, and a cut that inserts a channel. I have created another end condition for a modified embankment that creates a channel like the cut, but then puts a mound behind it…
  • End Condition Exceptions - Component Templates

    If you watch the Modeling Multiple Corridors in Roadway Designer video located here: It shows how to place end condition exceptions and to place new end conditions from a template. I created one with components and an end condition, like I thought was…