I currently have an alignment that goes from south to north 0+00 to 10+00 but when I display the stationing it reads from north to south.. how do u get to the style reverse the stationing to read right side up so its plan readable?

Hello, When I use a command chain as follows, the conduits direction cannot be change. How can I solve this? I create a line going from point A to point B (direction from A to B). Then I use the command "Extract Utilities from Graphic" command creating…

Hi, Despite having set my active angle readout in Settings -> Design File to be Degrees, Minutes, Seconds, and the direction mode to bearing my InRoads XML Geometry reports are still reporting the bearing in decimal degrees. I'm Using InRoads .845 how…

I have used the Import Geometry feature to import several horizontal alignments from the project's gpk file in order to create superelevation sections. Which is working fine, however, some of these alignment have been redefined in the gpk and the changes…

I am using MicroStation V8i (SELECTseries 2) - Version 08.11.07.443 and InRoads Survey V8i (SELECTseries 2) - Version 08.11.07.494 I am trying to add alignment points to the COGO buffer while at the same time retaining the original point names. I have…

Is there any way to adjust the traverse values (northing, easting, elev) in InRoads itself and it dynamically change all the other points that were shot from the reassigned traverse values? I've tried numerous ways and it still keeps the original values…

(Posted for BE Community User) Power Civil 08.11.07.614 Help is needed with Tabels, Archs and Automation.

Is there a way to use the "Inverse Direction" function (Geometry > Utilities > Inverse Direction) without the tool displaying the line. I know that under the "Annotate" tab there is a choice for "Display and Annotate", but this choice is an all or nothing…

I draped a short string on a bridge deck., to optain the existing levels and slope between the two points. I want to extend that string at the slope(that was between the first 2 points) to a string crossing the string any distance away. I my problem…

I created a geopak chain for a ramp I am designing using the store graphics tool. The ramp has a compound curve in the alignment. When I run my shape text file through the compound curve, the shape file draws an odd shape not associated with the alignment…

Hello, I am trying to transpose my geometry after I have already modeled my corridor in roadway designer. Geometry -> Utilities -> Transpose Geometry Geometry -> Horizontal -> Stationing This was successful-- the next step was not. Opened…

I am having an issue seeing the input files (.inp) generated by Geopak. Specifically I am trying to load a clients input file that was provided to me, however, I am finding that I cannot see the backup input files generated by Geopak or the ones I wish…

Just started using InRoad XM. I was required to come up with vertical elevation of a portion of train track. I have graphically imported the horizontal alignment (2D) and I've imported the survey text data of the verticall alignment. No available surface…

Problem... After I visualize my Geopak elements more than a few times the visualization stops working. In order to use visualization I have exit Microstation and start another session. This is extremely unproductive and happens quite often. Further…

(Posted on behalf of Bentley User) I am trying to view my cogo points table from View Geometry->Horizontal Annotation. For some reason, I can only see coordinates, not elevation. all the elevations are zero "0". Can you help me turn these point…

I have been looking at a bunch of forums trying to locate a solution to my problem, but have not found what I am looking for. So I am asking for some advice. I have created a Horizontal alignment from cogo points that have and XYZ location. When I…

(Posted on behalf of Be Communities member) InRoads V08.11.07.566 I am having a problem using the command File > Import > Geometry > From Graphics to import a horizontal alignment. The first curve imports as a series of short segments rather than…

My question is about the "Traverse" function (Geometry > Traverse). In the previous versions of InRoads, the default selection for the distance under the "Course" area was Horizontal Distance. In V8i, the tool is defaulted to Slope Distance. Can this…

I have the following data in ESRI shap file (.shp, .dbf) pipe data with up node, down node, up invert, down invert, diameter, shape man hole data with lid elevation, bottom invert and shaft diameter Can anyone help me with the steps to…

Hello all, I have been searching for a way to join vertical alignments using geometry commands, and am struggling. I have seen some legacy posts talking of 'copying' the vertical elements from one alignment to the destination, but this doesn't seem…