I am starting a new project, and I will need to cut cross sections from my existing ground. That is not working for me. When I called Support, they told me that Cross Sections from Surfaces does not work in SS3. Is this really so? Is there another…

Hi, I'm having a problem with the sheet layout--the sheets are not being laid out at the such that the proper elevation label is lining up with the cross section correctly. i.e. the cross section is too low or too high in the sheet with respect to the…

When attempting to run proposed cross sections (through project manager), I have found that the define variables section will not accept files that have a space in them. Through trial and error I have found that files referenced elsewhere throughout the…

Geopak V8i 08.11.07.615 I'm running Geopak Earthwork on cross sections and am constantly getting the "XS-W-DANGPROP Proposed undercut element between points:..." The earthworks ran fine in Geopak v8. I tried unlocking all elements and adjusting…

I am trying to get my ROW line to come in when I cut cross sections. I can get it to show up in Roadway designer by using display references. Does anybody know of a way to get these to show up when I cut cross sections? Ross

I am running a 6 lane divided roadway with 3 lane frontage roads in each direction. I have gotten the mainlanes to work and draw the pavement as I would need, but now I am trying to add in the frontage roads as seperate shape clusters. The shapes are…

Morning - I'm having a slight issue with developing some cross sections. I have a chain that is 2700+00 in length. There are roughly (10) segments on this chain that I would like to cut cross sections for separately (i.e. 0+00 to 24+00, 166+00…

I am trying to plot ancillary features in a cross section. For some reason, there are some features that won't plot for me. I am plotting using the "Level Symbology" method. Most features plot just fine, but others aren't coming out (Right of Way line…

Is there an easy way to get a list of all stations that have a cross section associated with them? Something I can put into a word document or excel spreadsheet? Geopak 08.08.03.24 MS 08.05.02.35

Any chance of adding Cross Section Navigator to future versions of Geopak Survey? We find that the surveyors would use this tool often if it was included in Survey.

I have come across a situation where I need to have the cross section sheets labeled as 1 of 100 on one portion of the tile block and as 300, 301, 302, etc. on each individual sheet in the title block in a different area. Currently in V8 it seems like…

I'm trying to export the existing roadway cross slope from cross sections to an ascii file. I have the slope labeled in the cross sections but not sure how to tell geopak to write the slope information to a text file. I would like to the text file to…

Team - I am trying to figure out how to label the ROW Lines in my cross sections that I generated from Corridor Modeling in Geopak. I have looked at the "Cross Section Labeling" tool and I can't seem to find how you are supposed to enter your…

As I do my earthwork runs, I have some construction that starts and stops and starts again. I would like Geopak to read those sections without proposed construction as "Zero volumes". Instead it skips over them, carrying earthwork quantities through areas…

Is there a way to get the corridor modeling XS labeler to label negative cross-slopes (i.e. normal crown) as "-2.00%"? In near-flat cross-slope situations it is very difficult to tell which way the pavement is sloping (other than comparing elevation labels…

When I try running the cross section labeling tool out of the Corridor Modeling window I get an error Run-time error '91': Object variable or With block variable not set I have the options to "End", "Debug", or "Help" "Debug" opens VBA…

I am trying to use GEOPAK SS3 for a production plan and here is my latest issue. I cut XS cells successfully in SS3. I then used GEOPAK SS2s cross-section sheeting tool while in the same MS session launched with "Load_GEOPAK_SS3=1" used. Nearly every…

I am confused how to create cross sections sheets with annotation using Geopak SS3. Using the Create Cross Section tool the following Preferences are offered. Create Cross Sections Create Cross Section Preferences Sheet Sheet – w/o Grid…

When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…