I am looking for a good "help document" that explains what is necessary for and the steps to take in order to label cross sections created by GEOPAK SS3. The cross-section labeler that I just became familiar with in SS2's Roadway Designer is gone, and…

I started a new thread with a new Subject in order to appeal to a larger audience... I am trying to work my way through an entire production design/plan preparation sequence using GEOPAK SS3 and am running into a few stumbling blocks. I realize that…

I am running Geopak SS3. I have created Cross Sections using the "Create Cross Sections" tool under corridor. The Sections look good. I created a proposed tin from corridor and I want to check it by plotting the proposed tin as existing ground on…

I am in my model design and have a cross section view. I have lost my existing ground line. Proposed is shown. I have set my active terrain to my existing and I have the existing boundary referenced. Any ideas why I can noe see my existing…

I am using a tool called "Visibility Tools" Found under DTM==>Analysis==>Visibility I have found that the "Offset Height" under "Drape on TIN" does not work in SS2 or SS3. The tool does work in V8 Philip Mashuda

When storing a spline profile in the corridor model, then exporting the profile to native (to the gpk file), the next to the last PVI is not exported to the gpk file. All other points are exported properly. Philip Mashuda

My current (production) MicroStation shortcut loads ustation.exe with no switches, but utilizes a modified mslocal.cfg to point to our networked workspace. Our workspace's standards.cfg then "includes" a geopak_config_vars.cfg file that sets our GEOPAK…

When Corridor Modeling and showing cross-sections I was having the issue of a certain surface feature always drawing on the active level rather than the level that it was supposed to as defined by an Element Template. This is supposedly happening because…

Hi, I desgned a profile in the roadway designer and have attempted to export the profile to native. I follow the prompts, and everything appears to work, but when I check the gpk file no proile is found. I see no error messages. Thanks…

I just submitted a service ticket 7000057128. (Also ticket 700057218) SS3 will no longer drape elements, using a 2d file and tin, to a 3d file. It does work in SS2. Defect number is D-127545 Phil

I am receiving an element template exception message when I change the template general properties. Anyone know why?

I'm working on a site model for an outdoor track and field complex. So far, I've completed my horizontal and vertical geometry, created terrain objects (one for the track, another for the sidewalk, a third for the infield, and a fourth for the outfield…

I am trying to use GEOPAK SS3 for a production plan and here is my latest issue. I cut XS cells successfully in SS3. I then used GEOPAK SS2s cross-section sheeting tool while in the same MS session launched with "Load_GEOPAK_SS3=1" used. Nearly every…

Is there any way to import a .ALG file (created with InRoads SS2) into Geopak SS3? I see all sorts of data file types that can be loaded into the Survey Book, but oddly no .ALG file type. Is there some other way that I supposed to add the horizontal geometry…

For a variety of reasons, I am trying to get MicroStation, Geopak (both SS2 and SS3), and InRoads (SS2) installed on my machine. I had it all installed at one point, but I had a variety of issues that crept up. To try and get everything working correctly…