• Re: GPK Drainage - Show water and sewer crossings in profile?

    Dan, With many, many thanks to Michael Gilham, it was discovered that the water/sewer dgn must be referenced into slot 1 of the drainage file for the crossings to be plotted correclty on the drainage profiles. Such a simple fix but certainly…

  • Instrument heights missing in PowerCivil V8i

    I have just upgraded to PowerCivil for Americas V8i V 08.11.05.37 from PowerSurvey XM (as it is no longer supported). I am in the process of creating a new dataset by importing raw survey data from a Trimble DC file and have noticed that the instrument…

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    Thanks Derricke, but unfortunately I still have not had any response.

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    Phil, I have contacted our Account Manager several times regarding this issue and unfortunately the best they are able to offer us is a temporary evaluation license to GEOPAK Site, which of course requires the full version of MicroStation V8i,…

  • Geopak V8i and Project Manager

    We've run into a situation with V8i Geopak. If we create a new project using Project Manager we can not open the newly created GPK file with Project Manager. We can open it with COGO. If we created a new GPK with COGO we still can not open it with Project…

  • Geopak

    Where's my stationing in the 2nd alignment at the red circle. These appear to be real darn similiar.
    • dctest.dgn

  • Re: GPK Drainage - Show water and sewer crossings in profile?

    Dan, I think we might be getting somewhere. When I open a water profile, GEOPAK thinks for a short while (presumably generating elevations along the plan view element), but then all the options in the profile box revert back to some sort of default…

  • GEOPAK - XS not catching symbology changes

    I noticed that in V8i, if I swithch from my xs file to my pattern line file and change the color of a pattern line, and also change my input file to only run xs on this one different colored pattern line, GEOPAK won't find the pattern line unless I exit…

  • Geopak V8i - DTM Tools Quick Profile - Changes?

    I am creating a quick profile using the Profile tool from the DTM Tools. I used to be able to set a vaule that was higher or lower than the minimum or maximum elevations in the profile preferences. With V8i it seems that if I set the min and max to different…

  • Re: GEOPAK - Customize Task List??

    I answeredmy own question by accident. You have to open the GeopakTaskNav.dgnlib found in ...geopak\v8.11\bin folder. Then you can customize as you normally would. I changed the entire Cadd Tools Task list to be identical to the Drawing Task list. Now…

  • Pattern Area

    Hi. Is there a way. or macro or somthing to pattern area (Geopak PowerCivil v8i SS2) so that the cells stay in tact and like chess board. Elar

  • Re: GPK Drainage - Show water and sewer crossings in profile?

    Dan, I found the culprit. There were some lines in my custom configuration that were pointing to wsp files when they should have been pointing to ppf files. GPKHYD_DEFAULT_PROFPREFWATER = f:/home/pw/cad/geopak_v8i/preference/mfld_wat.ppf…

  • Re: GEOPAK - Customize Task List??

    Thanks for the information, Robert. I actually had done what you said about editing a copy of the original dgnlib, but I didn't know where to call it via a configuarion file. Now I know. I have stored our customized dgnlib on our server so that everyone…

  • PowerCivil locks up on new dataset creation

    I am running PowerCivil for Americas V8i (as replacement for PowerSurvey GEOPAK). I am importing a new contour and feature survey and so have started with a blank 3D dgn file, created a new project and in the process of creating a new dataset…

  • V8i Civil Product Refresh

    Hello Civil Users, There is a problem which can occur in the following product versions under specific circumstances which might interest you. Affected versions are: Bentley GEOPAK Civil Engineering Suite V8i - 08.11.05.31 Bentley GEOPAK…

  • Re: Instrument heights missing in PowerCivil V8i

    Derricke, I have emailed through the raw Trimble DC file through to Bentley Support. The DC file in question is a V10-70 and the instrument height field is indead preceded by the E0NM code, as seen below (underlined and in italics); …

  • corrupt .rdp?

    I have been working on a 6 mile corridor in Roadway Designer/Corridor Modeler for a year now when I attempted to import Plan Graphics the other day and Microstation crashed. I have 15 alignments I wish to store, and they used to import just fine. Now…

  • Place Ramp Connector Tool - Geopak

    I am trying to use the Place Ramp Connector Tool in Geopak. There are three toggles ("Exit", "Back" and "Ahead" that allow one to select either "Spiral" or "Curve". My "Curve" options are always "greyed out" and unavailable for selection--I can only select…

  • Re: GEOPAK - Unable to save profile - Chain not found

    Nevermind. I deleted my .rsc files and all is well now. Josh

  • Print Organiser issue within PowerCivil.

    Similar to the problem that has been discussed earlier for GEOPAK, the Print Organiser has a similar problem within PowerCivil. Follow these instructions to ensure the probelm does not effect you. ______________________________________________________________________________________…

  • Re: Power Civil v8i & Vista

    Hi Neil, there are no known issues installing PowerCivil on a Vista machine. Please contact Support for assistance. 1-954-BENTLEY

  • Re: v8i GSF vs. XM GSF

    There is a key in to save a V8i GSF file as a XM version GSF file. The key in requires that Modeler is open and the the project you want saved to XM format is open/active. The key in command is: GPKSITE IMPORTEXPORT TOVERSIONXM

  • Geopak label updater - hit and miss success

    Hi all, using Geopak in MS v8i 08.11.07.443 I've placed labels using Plan View Labeler and now my grading changed. So I go back to Labeler and choose Tools>Label Updater. Choose my labels to be updated, choose Select by: Selection Set, click Start…

  • GEOPAK - Unable to save profile - Chain not found

    I am using the profile generator. I opened up a profile that I previously stored. I would like to change it, but when I try to save it I am told "Chain B not found." This profile is named BPRO1 and it is based on a chain named B. Navigator shows this…

  • Re: Compound Curves and Shapes

    Derricke, I am running geopak version 08.08.02.81 and version 8 microstation. I have attached my gpk fro you to view. The chains that have the problems are T_NW and T_SE. Let me know what you can find out. Thanks
    • jobI94.gpk
Communities
Support and Services
Training and Learning
Social Media